Katherine Mann
Active Member
- Joined
- Nov 6, 2007
- Messages
- 291
- Location
- Canada
- Lightroom Experience
- Advanced
- Lightroom Version
- Classic
As a number of people have asked this question I will post this here as a reference:
First, calibrate your monitor if you haven't done so already.
But, even if you can't do that immediately, the following settings will yield good results:
1. in the Print module, clicking on the Print Settings button ...
2. Choose your media type
3. Under Print Quality choose High
4. Under Color Intensity choose Manual. In the subsequent dialogue box choose None.
5. In the Print right hand panel under Color Management choose your print media - PR1 for Photo Paper Pro, SG1 for semi-gloss &c
6. Rendering intent Perceptual.
7. Hit Print and OK.
First, calibrate your monitor if you haven't done so already.
But, even if you can't do that immediately, the following settings will yield good results:
1. in the Print module, clicking on the Print Settings button ...
2. Choose your media type
3. Under Print Quality choose High
4. Under Color Intensity choose Manual. In the subsequent dialogue box choose None.
5. In the Print right hand panel under Color Management choose your print media - PR1 for Photo Paper Pro, SG1 for semi-gloss &c
6. Rendering intent Perceptual.
7. Hit Print and OK.