Chessman
Member
- Joined
- Jul 30, 2018
- Messages
- 39
- Lightroom Experience
- Intermediate
- Lightroom Version
- 6.x
- Lightroom Version Number
- Lr Classic
- Operating System
- macOS 10.13 High Sierra
Hi..last time I was asking a question in this forum it was a problem with my Lr6.14 standalone and ON1. many editing problems. Despite suggested solutions I wasn't able to resolve the issue because the fault lay with ON1. A friend was having the same issues . Fair play to ON1 we both received a full refund for the Raw 2019 version. I seem to be plagued with problems not only with photo editing but my 11 month old 27" iMac had to have a new power supply unit then photos and screen grabs put into Emails showed the top half of the photo and the rest of the full width photo down to the bottom thousands of very fine coloured lines..like arty wallpapewr. Text in screen grabs looked like it would if looking at it in a convex mirror..distorted. It took Apple several efforts over a few weeks to sort it including taking remote control of my iMac. That's been sorted now.
With Lr4 I used Elements11 for cloning and selective sharpening (usually birds) and NIK (as was) Define2 for NR. It worked very well for years until I got the new iMac at which point Elements 11 and Define2 could not be read/recognised by it. I don't do a massive amount of photography..steam locos,birds,miltary and commercial aircraft as and when and the usual holiday photos so I went for ON1 which was not a success as outlined above. I decided to sign up to subscription Lr Classic (July 30th )and now I have a new issue..
Prior to the current problem I've posted my steam loco photos in a couple of forums and sent them by Email to friends. These were at approximately 400-450Kb. The loco number on the boiler front was always sharp as was the one on the cab and the nameplate on the side of the boiler. This is no longer the case. At full size the photos are pin/tack sharp but not after compression to be able to post in a forum or included in an Email. I asked my friend, who also has Lr Classic and suggested I get it to resolve the above issues, if he was having the same issue with his photos..not steam locos ..and he does. I did a test with a steam loco re compression starting at Quality 100 - 90 - 75 - 50 - 30 -10. All turned out with exactly the same issue.
I've ticked the box for iMac High Sierra 10.13 but it's now 10.14.6 which isn't an option in the tick boxes here. I shoot in RAW. When I come to export a photo so I can post in a forum or Email it I select Jpeg and sRGB in the File Setting box. In the Quality box I select 80 - 90 The 'Limit file size box' is left unticked as is 'Don't Enlarge' I've tried 'Output sharpen for screen'..to no avail
For Image sizing I tick 'Resize to fit' and Long Edge 1200. I used to go for 'width/height 1000 x 1000. Infact I've just done that now and got an Email up and selected it from my Finder folder after expoprt and have the same result. I can't read the name of the loco and the boiler front number isn't sharp..so the issue remains the same. I've taken several loco photos over the past month and because of this issue haven't posted any, apart from two to ask in the forum if anyone knows why it's happening. There were no responses.Regarding sharpness quality of photos forums are unforgiving places.
The best example of the problem is with the maroon (British Rail Crimson Lake) Duchess of Sutherland. The first photo is Clun Castle. At full size both these photos are pin sharp. and the names can easily be read. Clun Castle , the first one..is in Finder at 703KB..The Duchess 635KB. Just to give a different subject I've just added a Rock Pipet bird. It's 361Kb. It should be sharper. I sharpened it in Lr Classic (Detail)
This problem has put a real damper on my enthusiasm for photographing steam locos but I still get out there to get the shots in the hope that this issue will eventually be resolved, otherwise I'm going to need councelling..lol.
703Kb
635Kb
361Kb
With Lr4 I used Elements11 for cloning and selective sharpening (usually birds) and NIK (as was) Define2 for NR. It worked very well for years until I got the new iMac at which point Elements 11 and Define2 could not be read/recognised by it. I don't do a massive amount of photography..steam locos,birds,miltary and commercial aircraft as and when and the usual holiday photos so I went for ON1 which was not a success as outlined above. I decided to sign up to subscription Lr Classic (July 30th )and now I have a new issue..
Prior to the current problem I've posted my steam loco photos in a couple of forums and sent them by Email to friends. These were at approximately 400-450Kb. The loco number on the boiler front was always sharp as was the one on the cab and the nameplate on the side of the boiler. This is no longer the case. At full size the photos are pin/tack sharp but not after compression to be able to post in a forum or included in an Email. I asked my friend, who also has Lr Classic and suggested I get it to resolve the above issues, if he was having the same issue with his photos..not steam locos ..and he does. I did a test with a steam loco re compression starting at Quality 100 - 90 - 75 - 50 - 30 -10. All turned out with exactly the same issue.
I've ticked the box for iMac High Sierra 10.13 but it's now 10.14.6 which isn't an option in the tick boxes here. I shoot in RAW. When I come to export a photo so I can post in a forum or Email it I select Jpeg and sRGB in the File Setting box. In the Quality box I select 80 - 90 The 'Limit file size box' is left unticked as is 'Don't Enlarge' I've tried 'Output sharpen for screen'..to no avail
For Image sizing I tick 'Resize to fit' and Long Edge 1200. I used to go for 'width/height 1000 x 1000. Infact I've just done that now and got an Email up and selected it from my Finder folder after expoprt and have the same result. I can't read the name of the loco and the boiler front number isn't sharp..so the issue remains the same. I've taken several loco photos over the past month and because of this issue haven't posted any, apart from two to ask in the forum if anyone knows why it's happening. There were no responses.Regarding sharpness quality of photos forums are unforgiving places.
The best example of the problem is with the maroon (British Rail Crimson Lake) Duchess of Sutherland. The first photo is Clun Castle. At full size both these photos are pin sharp. and the names can easily be read. Clun Castle , the first one..is in Finder at 703KB..The Duchess 635KB. Just to give a different subject I've just added a Rock Pipet bird. It's 361Kb. It should be sharper. I sharpened it in Lr Classic (Detail)
This problem has put a real damper on my enthusiasm for photographing steam locos but I still get out there to get the shots in the hope that this issue will eventually be resolved, otherwise I'm going to need councelling..lol.
703Kb
635Kb
361Kb