Color Space Question

  • Thread starter Thread starter bostaurus
  • Start date Start date
Status
Not open for further replies.
B

bostaurus

Guest
I shoot all of my photos in RAW, so no color space is assigned in camera. When I import them into Lightroom, I function in ProPhoto. My monitor is calibrated in the sRGB space. When exporting, I export .jpegs in sRGB space, which is what my print house requires. Do I have all my settings correct in order to have my prints match what I am seeing on my screen?
 
When i use L/R i run it the same way as you with no problems, Saying that i all ways check the print now and then, so your print house should have problems as i see..
 
bostaurus;4'89 said:
I shoot all of my photos in RAW, so no color space is assigned in camera. When I import them into Lightroom, I function in ProPhoto. My monitor is calibrated in the sRGB space. When exporting, I export .jpegs in sRGB space, which is what my print house requires. Do I have all my settings correct in order to have my prints match what I am seeing on my screen?
How do you calibrate your screen? I haven't seen an sRGB calibration option. I calibrate either using the Mac OS or an Eye One.
 
sRGB, is an image color space for the web, not a Monitor profile. Try actually calibrating your Screen.

Don
 
Kiwigeoff;41'3 said:
How do you calibrate your screen? I haven't seen an sRGB calibration option. I calibrate either using the Mac OS or an Eye One.
I guess I used calibrate out of context ... I selected the sRGB profile from my Color Display settings in System Preferences. It was running on the default of color LCD (which looks much nicer) prior to that. I am just trying to ensure quality when sending prints. I have had experiences and issues in past with things looking totally different!!
 
As Don has said you need to use a monitor calibrator like an Eye one or Spyder. This will profile your screen and then your prints should look like what you see on screen well as close as you can get from the different media.
 
And in the meantime, try switching back to ColorLCD for your monitor profile - it's going to be closer to accurate than sRGB, or try using the built in calibration to get a bit closer.

Handy double check for you - find a print you've had done at this lab, and find the associated file. Hold the print up by the screen... how close a match is it? That will give you a clue as to how close your monitor is to your output.

But I have to agree wholeheartedly, everything's going to be slight guesswork until you calibrate your monitor with hardware.

Your export settings for LR are spot on though!
 
Printer Profiles

In addition to calibrating your monitor, it is helpful to embed the printer profile in your files. You probably can obtain the printer profile for the particular printer and paper used by your print house from them.

Another option is to use Costco. Instructions for printer profiles are here: http://www.drycreekphoto.com/icc/

Using printer profiles is another step to perform, and it will take some time to learn how to do it. You will need to decide if the benefit is worth the extra time. This approach is critical if you must have exact colors as you would for product shots. In any case, you can get extremely good color matches between your profiled monitor and a profiled printer.
 
bostaurus;4'89 said:
I shoot all of my photos in RAW, so no color space is assigned in camera. When I import them into Lightroom, I function in ProPhoto. My monitor is calibrated in the sRGB space. When exporting, I export .jpegs in sRGB space, which is what my print house requires. Do I have all my settings correct in order to have my prints match what I am seeing on my screen?

You may be interested by the first thread I started here about a similar question... http://www.lightroomqueen.com/community/showthread.php?t=366

There is an interesting conclusion.
 
Last edited by a moderator:
Status
Not open for further replies.
Back
Top