jean36
Jan
- Joined
- Oct 12, 2011
- Messages
- 20
- Location
- Netherlands
- Lightroom Experience
- Advanced
- Lightroom Version
- Cloud Service
- Lightroom Version Number
- Lightroom Classis 10.2
- Operating System
- Windows 10
Hi everyone,
I hope not to bother you with this but I really need some advice with the following:
I used to photograph with a dual Nikon Z7 setup and I recently added a new Nikon Z6 II to it.
I changed my dual camera setup to one Z7 and one Z6 II.
I pair the Z7 with a 24-70 and the Z6 II with a 70-200. The lenses are both native Z mount.
So after a photoshoot I end up with a folder full of photo's taken with 2 different body's.
And there's where the trouble starts.
When imported the folder in LR I see two main differences:
Z7
Tint: -17 correction
Lens corrections: no box ticked here, 'built in lens profile applied'.
Z6 II
Tint: 0 correction
Lens corrections: I have to tick the box of Enable Profile Corrections and LR finds the correct Z lens. Or do I have to leave this unticked? It is not clear to me that LR uses lens corrections automatically when I leave lenscorrections off since there is no 'built in lens profile applied' text here, there is nothing. I think ticking the box here is the right thing to do.
In overall the usually corrections like sharpness, saturation and noise reduction I make with the Z7 is way too heavy when I apply the same corrections at the Z6 II.
It looks like the Z7 needs much more correction then the Z6 II.
In comparison the Z7 looks way too green (that shows the -17 correction in 'tint') and the Z6 II looks just neutral.
So besides an import preset for the Z7 I need to build an import preset for the Z6 II.
Then the question is; what is the best way to import my photo's AND apply the right preset for each body?
Thanks
Jan
I hope not to bother you with this but I really need some advice with the following:
I used to photograph with a dual Nikon Z7 setup and I recently added a new Nikon Z6 II to it.
I changed my dual camera setup to one Z7 and one Z6 II.
I pair the Z7 with a 24-70 and the Z6 II with a 70-200. The lenses are both native Z mount.
So after a photoshoot I end up with a folder full of photo's taken with 2 different body's.
And there's where the trouble starts.
When imported the folder in LR I see two main differences:
Z7
Tint: -17 correction
Lens corrections: no box ticked here, 'built in lens profile applied'.
Z6 II
Tint: 0 correction
Lens corrections: I have to tick the box of Enable Profile Corrections and LR finds the correct Z lens. Or do I have to leave this unticked? It is not clear to me that LR uses lens corrections automatically when I leave lenscorrections off since there is no 'built in lens profile applied' text here, there is nothing. I think ticking the box here is the right thing to do.
In overall the usually corrections like sharpness, saturation and noise reduction I make with the Z7 is way too heavy when I apply the same corrections at the Z6 II.
It looks like the Z7 needs much more correction then the Z6 II.
In comparison the Z7 looks way too green (that shows the -17 correction in 'tint') and the Z6 II looks just neutral.
So besides an import preset for the Z7 I need to build an import preset for the Z6 II.
Then the question is; what is the best way to import my photo's AND apply the right preset for each body?
Thanks
Jan